Metal Roofing in Austin, TX — RoofsOnly.com

If you own a home in Central Texas and you haven’t seriously considered a metal roof, it’s worth taking another look. Austin’s climate is one of the hardest on conventional roofing — intense summer heat, sudden hailstorms, high UV exposure, and the kind of wind that shreds shingle edges in a single storm. Metal roofing was built for exactly this environment.

At RoofsOnly.com, metal roofing is one of our most-requested services. We install standing seam metal roofs, stone-coated steel, and metal shingles across Austin and the surrounding communities. Whether you’re replacing a failing asphalt roof or building new, this page covers everything you need to know.

Types of Metal Roofing We Install

Not all metal roofing is the same. Here’s a breakdown of the three systems we work with most, and when we’d recommend each one.

Standing Seam Metal Roofing

Standing seam is the premium option — and the one we install most often on high-end residential and Hill Country properties. Panels run vertically from ridge to eave, locking together with raised seams that conceal all fasteners beneath the surface. This concealed fastener system is what sets standing seam apart from cheaper metal options.

What makes it worth the investment in Austin specifically:

• • Concealed fasteners eliminate the leak points that exposed-fastener panels develop over time

• • Rated to withstand winds up to 140 mph — relevant during Texas thunderstorm season

• • Kynar 500® PVDF finish resists UV degradation, chalking, and color fade in the intense Texas sun

• • Lifespan of 40–70 years — compared to 15–20 for standard asphalt

• • Reflective finish reduces attic heat load, lowering cooling costs during Austin summers

• • HOA-friendly profiles available in both modern and traditional color palettes

Standing seam panels are fabricated from high-grade steel or aluminum and can be roll-formed on-site to match your exact roof dimensions. We guide you through panel profiles, thickness, and color selection as part of our consultation.

Typical installation timeline: 3–7 days for a standard residential project. We provide a precise timeline after our roof evaluation.

Stone-Coated Steel Roofing

Stone-coated steel gives you the performance of metal with the look of traditional shingles, tile, or shake. The steel substrate is coated with stone chips bonded with an acrylic film, creating a surface that’s visually indistinguishable from conventional roofing materials at street level.

This is the right choice when:

• • Your HOA requires a traditional shingle or tile appearance

• • You want metal durability without the modern standing seam aesthetic

• • Your home has a complex roofline with multiple valleys and hips

• • Budget is a consideration but you still want metal-grade longevity

Stone-coated steel typically lasts 40–50 years and carries strong impact resistance ratings. We have a dedicated page covering stone-coated steel in detail if you want to go deeper on that option.

Internal link placeholder: [Stone-Coated Steel Roofing — RoofsOnly.com]

Metal Shingles

Metal shingles are individual interlocking panels designed to mimic the look of asphalt shingles. They’re lighter than stone-coated steel and easier to install on roofs with complex geometry. They offer solid performance and longevity improvements over asphalt, though without the full warranty profile of standing seam.

Metal shingles are a good middle-ground option for homeowners who want to move away from asphalt but aren’t ready for a full premium system.

Why Central Texas Is Hard on Conventional Roofing

This isn’t an abstract concern. Austin and the surrounding corridor — Georgetown, Round Rock, Kyle, Lakeway, Buda, Cedar Park — sit in one of the most active hail corridors in the United States. Williamson County alone sees multiple significant hail events per year. Combine that with summer temperatures that regularly push roof surface temps past 150°F, and the UV index that fades and brittle-izes shingle granules faster than in almost any other region, and you have a market where asphalt roofing is genuinely underperforming.

Here’s what we see constantly on inspection calls:

• • 15–18 year old shingle roofs with granule loss across the entire field

• • Thermal cracking on south and west-facing slopes from repeated heat cycling

• • Hail damage that’s invisible from the ground but clearly present on inspection

• • Flashing failures at penetrations from years of expansion and contraction

Metal roofing addresses each of these failure modes directly. The material doesn’t granulate, doesn’t crack from heat cycling, is rated to specific hail impact classes, and expands and contracts as a unified system rather than at individual points.

The Kynar 500® Finish — Why It Matters in Austin

The finish on a standing seam metal roof isn’t cosmetic detail — it’s engineering. Kynar 500® is a PVDF (polyvinylidene fluoride) coating used on some of the most demanding architectural applications in the world. It was specifically developed to handle prolonged UV exposure and temperature swings.

In practical terms for an Austin homeowner:

• • Your chosen color stays true for decades — no streaking, dulling, or patchy fade

• • The coating resists chalking, which is the powdery surface breakdown that makes cheaper metal roofs look old within 10 years

• • Reflective variants reduce roof surface temperatures, cutting the heat load on your HVAC system

• • The finish is fully backed by manufacturer warranty

Competitor panels without Kynar 500® use inferior paint systems that chalk and fade significantly faster in Central Texas conditions. When we spec a standing seam project, Kynar 500® isn’t optional.

Energy Efficiency and Insurance Benefits

Metal roofing in Texas has two financial upside factors that often surprise homeowners:

Energy Costs

Reflective metal roofing can reduce cooling costs meaningfully during Austin summers. By reflecting solar radiation rather than absorbing it, a properly specified metal roof keeps attic temperatures significantly lower — reducing the load on your HVAC and the duration it needs to run. Estimates vary by insulation quality and home orientation, but energy savings of 20–40% on cooling costs are commonly cited for reflective metal roofing in hot climates.

Insurance Premiums

Some insurers offer reduced premiums for homes with metal roofs due to their superior impact resistance and fire rating. This varies by provider and policy, but it’s worth a direct conversation with your insurance agent before your next renewal. We can also document the impact resistance rating of whatever system we install, which you can provide to your insurer. Learn more about how we handle the insurance claim process for storm and hail damage.

Our Installation Process

We don’t sell jobs and hand them off. Every metal roof we install is managed by our own team from evaluation through final walkthrough.

• • Step 1 — Free Roof Inspection: We evaluate your current roof, document any existing damage, assess the deck condition, and identify any structural issues before we quote.

• • Step 2 — Detailed Consultation: We walk you through your material options, panel profiles, color selection, and provide a fully transparent quote with no pressure.

• • Step 3 — Professional Installation: Certified installers handle the project, typically completing residential installs in 3–7 days. We coordinate tear-off, deck inspection, underlayment, and panel installation as one continuous workflow.

• • Step 4 — Final Walkthrough and Warranty: We walk the completed roof with you, confirm everything meets our standards, and provide your warranty documentation.

We almost always recommend a full tear-off rather than installing over existing shingles. This lets us inspect and repair the deck, ensuring your new metal roof has a solid foundation for its full lifespan.

Metal Roof Installation, Repair & Replacement – Contact RoofsOnlyAreas We Serve

We install metal roofing across the greater Austin metro and surrounding communities, including:

• Austin (all neighborhoods and zip codes)




• Georgetown and Williamson County




• Round Rock, Cedar Park, Leander




• Kyle, Buda, and Hays County




• Lakeway, Bee Cave, Westlake




• Pflugerville, Manor, Easton Park




• New Braunfels, Wimberley, Dripping Springs

If your community isn’t listed above, call us at (512) 746-7090 — we cover a wide service area and can confirm coverage for your address.